Tag list

PCs Corbel is a modular hidden column corbel where the cast in part enables straight mold walls and bolted bracket offers superior adjustability and high resistances. PCs Corbels can be used in precast concrete beams with PC beam shoes, and also with steel beams and composite beams, like Deltabeams, with suitable end plates. There is a special PC Lock available for hindering negative support reaction. Need to connect 2 or more beams to your column, round or rectangular? Do it with PCs corbels!

PETRA Slab hanger is a steel plate structured hanger for a hollow-core slab that needs to be supported somewhere between the main support points. It is used for making openings of any size into a hollow-core slab floor. PETRA distributes the load of the slab into the adjacent slabs. Standard sizes available up to 500 mm thick slab. Up to 10 m spans are easily supported with standard PETRAs.

PSB Punching and Shear Rails offer simple and reliable solutions against punching failure (PSB) and shear failure (PSB-S) of slabs by increasing their resistance. It is applicable for various kinds of slab systems and installation situations. Available as Standard 2- or 3-stud elements or as Normal elements with up to 10 studs individually manufactured according to the static requirements as designed.

Use of  Deltabeam with filigran-type floor slabs allows lighter foundations and flexibility in walls. Deltabeam is available in heights of 200 mm to 500 mm and legths according to needed span. This proven composite beam can be used for both straight and curved edges.

Typically Deltabeam is used in the shorter span direction of the grid, while the longer span is built with the load bearing decking. Especially efficient when used with deep decking. Deltabeam is available in heights of 200 mm to 500 mm and legths according to needed span. This proven composite beam can be used for both straight and curved edges.

Deltabeam - hollow core slab construction offers even ceilings to please the eye. Utilize the hollows of both the slab and beam for leading through piping and wires. Deltabeam allows frame grid area up to 12 m x 12 m  and 8 m x 16 m. It is available in heights of 200 mm to 500 mm and legths according to needed span. This proven composite beam can be used for both straight and curved edges.

CUBO Column Caps are applicable for high punching laods. By increasing the critical circumference the shear stresses are reduced. Often used in combination with the PSB Punching Reinforcement it enables to resist against major punching loads.

Peikko's wide range of officially tested and approved Punching Shear Reinforcement system offers an economical concrete floor construction. Straight column structure gives ideal conditions for optimal building use. Peikko punching reinforcement is a simple and reliable solution against punching and shear failure in floor slabs. It is applicable for cast-in-situ and precast floor systems for both top and bottom installation situations. The Peikko system enables flat floor slabs giving reduced storey height, with thin columns without corbels. Choose this powerful and economical solution with aesthetic appeal!  

Deltabeam is a superior composite slim-floor system for multi-storey buildings of any kind from villas to high-rise constructions. It allows flexible lay-outs through the whole life cycle of the building, and easy HVAC installations. Excellent fire resistance without any additional protection. Deltabeam combines the strengths of steel and concrete. It is an effective, cost-efficient system for various slab types. During the past two decades, more than 10,000 buildings have been built using Deltabeams. Whether your requirement involves 1 or 12,000 m / project, Deltabeam is the solution for you. Enjoy architectural freedom with Deltabeam specially designed and manufactured to suit your project!

Modern modular hidden corbels are formed with cast in PCs corbels and brackets. The system, offering superior adjustability at site, enables straight precast mold. Peikko PCs Corbels can be used with precast concrete beams together with PC Beam Shoes. The system suits also to steel beams, composite beams with suitable steel end plates. This hidden column corbel system is a natural partner for Deltabeam.   Achieve high connection resistance even with slender cross sections!

Peikko's Punching and Shear Reinforcement Systems enable simple installation of the floor slab reinforcement without spacers by placing the system on top or with spacers under the main reinforcement. The Punching and Shear Reinforcement is used in reinforced concrete floor slabs that are cast directly onto columns or walls without supporting beams. The system increases, even by 90 %, the punching shear capacity of the floor. The system is usable for slab thicknesses starting from 18 cm. PSB Reinforcement Systems make reinforcement work on site easy compared to traditional reinforcement stirrup assembly. Avoid punching failure of slabs in an extremely cost-effective and sure way by using Peikko's full range of approved Punching Reinforcement for Cast-in-situ as well as for Precast Concrete applications. Our acutely user-friendly Peikko Designer software, our qualified technical support team and our delivery flexibility - directly from storage or tailor-made- will extend your lead!

Get the best out of precast floors with composite Deltabeam allowing frame grid area up to 12 m x 12 m and 8 m x 16 m. Minimize the completion time of your project by the fast and accurate assembly of floors. Use Deltabeam with concrete or steel columns. Short lead times with flexible deliveries from factories in Europe, USA, and Middle East.

Deltabeam gives an energy efficienct solution by reducing the volume of the building. Use it with corrugated metal decking, filigran type floors, formwork or even with beam and block floors. Compared to traditional floor structure, Deltabeam saves up to 500 mm in storey height!

Use Deltabeam for building completely new floors to empty spaces or rebuilding an existing floor, or adding more stories to a building. Achieve e.g. more loading capacity, reduced dead weight of the floor, easy installation of HVAC, and all this with a slim structure. Deltabeam floor is extremely suitable for changing old factories into hotels or offices. Even offices have been turned into shopping centers with Deltabeam. Length and height of the Deltabeam is fitted according to your project needs.

PBH Corbels, easily dimensioned with design tables, are essential steel assemblies allowing TT slabs, hutchplates and ancillary beams to be placed on supporting beams without the necessity of girder flanges or notched ends. Furthermore no additional installation or assembly support is needed. Extend your lead by using Peikko's PBH Corbel system and the full range of its benefits.

Imagine architectural freedom with standardized precast building method. It is possible! Peikko's products are inside office buildings, car parks, shopping centers, residential buildings and public buildings such as hospitals, schools, and kindergartens. More open space required? Even ceiling structure? Answer is Peikko's Deltabeam composite beam. Fancy hidden corbel systems for better visual look and flexibility for refurbishment in the future? Answer is Peikko's PC-corbel system. Read more from Peikko solutions below.

Make your work easy with reliable and approved Peikko products and software tools! The Peikko products are tested in various institues e.g. in Finland, Sweden, Germany, the United Kingdom, and Italy. In addition about 100 national and EU approvals proof the safety and reliability of Peikko products. Click here to download Technical Manuals of Peikko products. Software tools available for you include e.g. 2D AutoCAD blocks enabling you to insert Peikko products into your design, and 3D Tekla, Revit and Nemetscheck Allplan components to make your work efficient by cutting down design time. Click here to go to our software download center. You can also download free Peikko Designer® calculation and design software to define and optimize preferred products.

If you only want to minimize building material costs of a project, Peikko has very limited range of solutions to offer. But, if you want to optimize total costs of the building project and improve end user experience - then Peikko is your partner! Peikko solutions are based on industrially made, approved products. Since 1965 Peikko has developed special solutions to enable fast and durable construction of buildings - and in a way that also architects are pleased.

By combining composite beams and precast, optimizing completion time of a building project is possible. By using industrially made, tested Peikko products, with necessary approvals, workload at construction site is minimized. For cast-in-situ (cast- in-place) applications Peikko offers a variety of engineering products to improve construction operations simultaneously emphasizing the visuality of the building.